Frequently Asked Questions

Most metal roofs last 40–50+ years when installed correctly, often outlasting multiple cycles of asphalt shingles. With proper installation and minimal maintenance, many metal roofs can last the lifetime of your home.

With proper underlayment and attic insulation, a metal roof is not significantly noisier than a traditional shingle roof. Modern installation techniques include sound-dampening layers that minimize any noise difference.

In some cases, yes. However, we typically recommend a full tear-off to inspect the roof deck for damage, ensure proper ventilation, and provide the best long-term results. We'll assess your specific situation during the estimate.

Metal roofing typically costs 2–3x more upfront than asphalt shingles. However, when you factor in the 40–50 year lifespan versus 15–20 years for shingles, lower maintenance costs, and energy savings, metal often costs less over time.

Yes, a building permit is typically required for roof replacement in most GTA municipalities. We handle all permit applications and inspections as part of our service.

Most residential metal roof installations take 3–7 days depending on the size and complexity of your roof. We'll provide a specific timeline during your estimate based on your home's requirements.

For most commercial applications in the GTA, we recommend TPO (thermoplastic polyolefin) or EPDM rubber roofing. TPO offers excellent energy efficiency with its reflective surface, while EPDM provides proven durability at a lower cost. The best choice depends on your building size, budget, and energy goals.

A properly installed flat roof typically lasts 20–30 years. TPO and EPDM membranes come with 20-25 year manufacturer warranties. Modified bitumen systems can last 25-30 years. Lifespan depends heavily on installation quality, drainage, and maintenance.

Yes, we offer flat roof repair services including emergency leak repairs. We'll identify the source of the leak—often at seams, penetrations, or flashing details—and provide either a targeted repair or recommend replacement if the roof has reached end-of-life.

Flat roofs require proper drainage design to prevent ponding water. We ensure adequate slope (minimum 1/4" per foot) and install drains, scuppers, or gutters as needed. Ponding water is the #1 cause of flat roof failure—we engineer it out from the start.

Flat roofing typically costs $8–15 per square foot installed, depending on the system chosen. This is often less expensive than sloped roofing materials on a per-square-foot basis. For commercial buildings, the larger roof area means material choice significantly impacts total cost.

Yes, we offer preventative maintenance programs for commercial flat roofs. Regular inspections catch small issues before they become expensive repairs. Most programs include bi-annual inspections, drain clearing, and minor repairs.

Landscaping projects vary widely based on scope. A front yard refresh might start around $5,000–$15,000, while a complete backyard makeover with patio, plantings, and lighting typically ranges from $25,000–$75,000+. We provide detailed quotes after understanding your goals.

Both! We offer full design services where we create custom plans based on your goals and property. We can also work from existing plans if you've already worked with a landscape architect or have specific ideas you want executed.

It depends on the scope. Retaining walls over a certain height, decks, and structures typically require permits in most GTA municipalities. We handle all permit applications as part of our service and ensure everything is built to code.

Spring (April–June) and fall (September–October) are ideal for planting. However, hardscape work like patios and retaining walls can be done throughout the building season (April–November). We recommend booking early as schedules fill up quickly.

Proper drainage is built into every project. We assess your property's existing drainage patterns and incorporate solutions like French drains, swales, and proper grading to direct water away from your home and prevent pooling.

We focus on design and installation rather than ongoing maintenance. However, we provide detailed care instructions for all plantings and can recommend trusted maintenance partners if needed.

Basement underpinning typically ranges from $150–$300+ per square foot depending on the depth increase, soil conditions, and complexity. A typical project for a semi-detached home might range from $80,000–$150,000+. We provide detailed quotes after a site assessment.

Most underpinning projects take 6–12 weeks depending on the size of the basement and complexity of the work. This includes excavation, underpinning sequence, new slab, and basic finishing. We'll provide a specific timeline during consultation.

Not necessarily, but it's often more comfortable to do so during the most disruptive phases. We can usually maintain access to upper floors and work in sections to minimize disruption. We'll discuss logistics specific to your situation.

Yes, completely. We work with licensed structural engineers to produce stamped drawings, handle all permit applications with your municipality, and coordinate all required inspections throughout the project.

Yes, when done properly. Our engineered approach includes careful sequencing, temporary supports, and monitoring to protect both your home and adjacent properties. For semi-detached and townhomes, we take extra precautions and communicate with neighbors.

Absolutely—and it's often the most cost-effective approach. Once the underpinning and new slab are complete, we can continue with full basement finishing including framing, electrical, plumbing, and finishes.

Kitchen renovations vary significantly based on scope. A refresh with new counters, backsplash, and refinished cabinets might start around $25,000–$40,000. A full gut renovation with new layout, custom cabinets, and appliances typically ranges from $50,000–$100,000+.

We manage the entire permit process. This includes preparing drawings, submitting applications, scheduling inspections, and ensuring all work meets Ontario Building Code requirements. Permit costs are included in our quotes.

For most projects, yes—though comfort levels vary. Kitchen renovations are more disruptive than bathroom updates. We set up dust barriers, maintain access to essential areas when possible, and communicate daily schedules so you know what to expect.

Changes happen, and we have a clear process. Any scope changes are documented with a written change order that includes the cost and schedule impact before work proceeds. No surprises on your final invoice.

Timelines vary by scope: a bathroom renovation might take 3–4 weeks, a kitchen 6–10 weeks, and a full basement 8–12 weeks. Larger whole-home renovations can take 4–6+ months. We provide detailed schedules during the planning phase.

We offer both. Our design-build approach means one team handles everything from initial concepts through construction. This streamlines communication, reduces errors, and often saves money compared to hiring separate designers and contractors.

Yes, all estimates are free and no-obligation. We will visit your property, discuss your goals, and provide a detailed written quote at no cost to you.

We serve the entire Greater Toronto Area including Toronto, Mississauga, Brampton, Vaughan, Oakville, Markham, and surrounding cities.

Yes, Buildoreno is fully licensed, insured, and WSIB-certified. We carry comprehensive liability insurance and can provide proof of coverage upon request.

We use milestone-based payments with $0 down. You only pay as work is completed. Your first payment is due when materials arrive on-site, and the final payment is held until you approve the finished work.